IS3500

IEEE 1588v2 PTP Boundary Clock
Key Customers
Mobile Communication Providers
Power Industry/ Rail Industry
ISP Service Providers/ Transmission Network

Basic Informations

Model IS3500
Type IEEE 1588v2 PTP Boundary Clock
Compliance IEEE 1588v2-2008
Clients 64
Applied Fields 4G/LTE-FDD/TDD, LTE-Advanced Networks
Ethernet Backhaul Networks
WiMAX Backhaul Networks
Passive Optical Network (PON)
Electric Power Network : Substation
Size 438mm(W) x 265mm(D) x 89mm(H), 2U

Product Overview

This product provides a function to minimize a deviation of error, which results from traffic overload between GrandMaster equipment and slave module, and error during classification of network domain.

This product has interface that has both master function and slave function. As a master function, it delivers time information to slave modules, and as a slave function, it corrects the time difference by PTP coordination.

This product coordinates to more than two master equipments through dualization, which allows the product to acquire precise timing information, and synchronize it’s time to master equipment that has superior timing quality, and then transmit that timing information.

Produce precision timing synchronization

We developed our own algorithm (SPW1588TM), which allows this product to synchronize timing more accurately with master equipment, and produce reliable high precision clock synchronization.

Product Features

  • IEEE1588v2-2008 Precision Time Protocol (PTP) Boundary Clock
  • Lock to PTP master based on PTP standard protocol
  • Pass through for user traffic via LAN port
  • Up to 3 ports 100/1000Mbps for PTP clients interface
  • Supporting up to 3 IP domains for PTP clients
  • Supporting BMCA based on PTP standard
  • Up to 64 clients at 128/sec PTP rate
  • Hardware-based PTP packet processing, No performance degradation and accuracy
  • 10MHz, 1PPS signals out via BNC ports
  • ToD signal out via IRIG-B, RS232 ports
  • IRIG-B000/B120 type by factory option
  • DC or AC power by factory option
  • WEB UI, and CLI management

Applied Fields

  • 4G/LTE-FDD/TDD, LTE-Advanced networks
  • Ethernet backhaul Networks
  • WiMAX backhaul Networks
  • Passive Optical Network(PON)
  • Electric power network: Substation

Specification

PTP master interface

  • RJ45 modular, IEEE802.3 physical IF
  • 100M/1000M base Ethernet
  • PTP over IPv4
  • Fully comply with IEEE1588v2-2008 standard

Mechanical

  • Case size : 438 x 264.6 x 86.8 mm (WxDxH)
  • 2U rack mountable

Environmental

  • Operating temperature : 0 ~ 50℃
  • Operating humidity : 0 ~ 90%
  • RH non-condensing
  • Storage temperature : -40 ~ +70℃

Power Supply

  • Factory option : AC or DC input
  • AC input : 220Vac±10% @60Hz
  • DC input : -42 ~ -60Vdc
  • Power consumption : Max 35W

I/O Port in Rear Panel

  • Monitoring
  • - 1PPS output: 50Ω BNC [Female] x4
  • - 10MHz clock output: 50Ω BNC [Female] x1
  • IRIG-B out : 50Ω BNC [Female] x4
  • ToD out : RS232, RJ45 x4

I/O Port in Front Panel

  • PTP-S, LAN, PTP-M : RJ45 modular, 100M/1000M
    copper, Ethernet
  • CLI : RS232, RJ45 (CLI-M, CLI-S)
  • Management
  • - RJ45 modular, 100M/1000M copper,
    Ethernet (MGMT-M, MGMT-S)

Monitoring Output

  • 10MHz clock : LVTTL, disable by
    configuration
  • 1PPS : LVTTL, disable by configuration
  • IRIG-B000 : LVTTL, 100pps
  • IRIG-B120 : AM Sinewave, 100pps

IEEE1588v2 PTP Master Interface(PTP-S)

  • Up to 128 PTP messages per second per
    client
  • PTP over IPv4
  • Best Master Clock Algorithm(BMCA), with
    default profile. Supporting Alternate Master
  • IEEE1588v2 PTP End-to-End

Local pass-through user traffic (LAN)

  • By-passed the user traffic from mixed traffic
    Mixed Traffic : User & PTP Traffic
  • 100M/1000M ethernet interface

IEEE1588v2 PTP Master Interface (PTP-M)

  • Up to 128 PTP messages per second per
    client
  • PTP over IPv4
  • 1 or 2 step PTP mode